2x660MW Combined Cycle Power Plant
-Management of Electrical Maintenance and I&C teams.
-Preparation of technical specifications for the renewal of -8MVA Start-up transformer and 154kV breaker (Continued).
-Prepearing annual maintenance plans and preparing reports
-Preparation of annual maintenance specifications,
- Follow-up of periodic maintenance and predictive maintenance works,
-Creation of critical spare part lists,
- Monitoring of KPI and maintenance activity parameters,
- Follow-up of sub-contractors and making qualification assessments,
-Preparing the RCA of the 705MVA Step up Transformer (Correct the flex busbar connection between bushing to
winding, Changing 21kV bushing), Managing the correction period.
-Generator Circuit Breaker Maintenance and Checks (Making DCRM test with vendor)
-Planning the Transformer Tap Changer Maintenance
-9.4 MW Solar Power Plant Investment (Continuing)
-CAPEX, OPEX budgets creation
-Managing the purchasing period

2x660MW联合循环电厂
-电气维护和I&C团队的管理。
-编制-8MVA启动变压器和154kV断路器更新的技术规范（续）。
-制定年度维护计划并准备报告
-编制年度维护规范，
- 跟进定期维护和预测性维护工作，
-创建关键备件清单，
- 监控KPI和维护活动参数，
- 跟进分包商并进行资格评估，
-准备705MVA升压变压器的RCA（将套管之间的柔性母线连接校正为）
绕组，更换21kV套管），管理修正周期。
-发电机断路器维护和检查（与供应商进行DCRM测试）
-变压器分接开关维护规划
-9.4MW太阳能电站投资（续）
-CAPEX、OPEX预算的制定
-管理采购期

Preparation of Periodic Control and Maintenance forms of equipment,
Preparation of maintenance procedures and instructions,
Preparation of spare parts lists,
Preparation of the necessary hand tools lists for the personnel and the workshop,
Preparation of annual maintenance budget,
Reporting the deficiencies and revision requirements in the field during the commissioning process,
Personnel planning, business negotiations with new personnel to establish a team,
After commissioning, intervening in all field failures and making necessary reports,
Root cause analysis as a result of major malfunctions,
Preparation of necessary specifications by purchasing equipment or services,
Preparing maintenance plans for equipment in HV, MV, LV systems,
Performing MV relay, busbar and breaker tests,
Maintenance of Generator, Excitation system, 380kV GIS, Main transformers,
Troubleshooting of electric motors and drivers,
Reading the fault records of Motor VFD's and Protection relays, changing the parameters if necessary,
Taking back-ups of motor VFD's and protection relays and ensuring that the back-ups are constantly up-to-date

准备设备的定期控制和维护表格，
准备维护程序和说明，
备件清单的编制，
为人员和车间准备必要的手动工具清单，
编制年度维护预算，
在调试过程中报告现场的缺陷和修订要求，
人事规划、商务洽谈与新人建立团队，
调试后，对所有现场故障进行干预并做出必要的报告，
重大故障导致的根本原因分析，
通过购买设备或服务来准备必要的规格，
为高压、中压、低压系统中的设备制定维护计划，
执行中压继电器、母线和断路器测试，
发电机、励磁系统、380kV GIS、主变压器、
电动机和驱动器的故障排除，
读取电机变频器和保护继电器的故障记录，必要时更改参数，
对电机变频器和保护继电器进行备份，并确保备份始终保持最新状态

Job Definition
Preparing the tender specifications for the switchyard insulator coating process, receiving the bids, making the bid evaluation and ensuring all coordination during the implementation of the process.
6,3kV MV busbar, breaker, cell maintenance.
0.4kV LV busbar, breaker maintenance.
Optimizing the lighting of the whole area according to the lighting calculation within the scope of lighting improvement.
Performing all fault maintenance and improvements (exploration and application) of Electrostatic Filter, Port, Coal belt system, project revisions.
Taking monthly production consumption meter values and sending them to TEIAS, analyzing them by comparing the meter and production consumption values.
Taking backups of MV Relay, Driver and PLC systems, eliminating the faults and making the necessary revisions
Carrying out periodic maintenance and predictive maintenance activities. Preparation of care instructions.
Performing annual planned maintenance in accordance with the manufacturer's data and regulations (according to maintenance instructions).
Making the necessary purchases, following up the warehouse stocks, calculating the minimum and maximum stock amounts of the equipment, backing up the equipment that may cause critical and production loss.
Ensuring the coordination of the Institutional Asset Management (Boysweb) by including all equipment and people in the system.

准备开关站绝缘子涂装工艺的招标规范，接收投标书，进行投标评估，并确保在实施过程中的所有协调。
6.3kV中压母线、断路器、电池检修。
0.4kV低压母线、断路器检修。
在照明改善范围内，根据照明计算优化整个区域的照明。
进行静电过滤器、港口、煤带系统、项目改造的所有故障维护和改进（勘探和应用）。
获取每月生产消耗量表值并将其发送到TEIAS，通过比较测量值和生产消耗值进行分析。
对 MV 继电器、驱动器和 PLC 系统进行备份，排除故障并进行必要的修改
进行定期维护和预测性维护活动。准备护理说明。
根据制造商的数据和规定（根据维护说明）进行年度计划维护。
进行必要的采购，跟进仓库库存，计算设备的最小和最大库存量，备份可能导致严重和生产损失的设备。
通过将所有设备和人员纳入系统来确保机构资产管理 （Boysweb） 的协调。

Job Definition
Central Control Room Engineer
Project and field comparisons of the boiler, turbine and electricity sections in the power plant are identified and reporting is made to create optimum operating conditions for the enterprise.
Providing organization during the commissioning of the power plant from the control room.
Ensuring that the system remains operational under optimum operating conditions, monitoring and performing the necessary tests.
380kV closed switchyard (GIS) maneuvering and operation.

中央控制室工程师
确定电厂锅炉、汽轮机和电力部分的项目和现场比较，并进行报告，为企业创造最佳运行条件。
在控制室的发电厂调试期间提供组织。
确保系统在最佳运行条件下保持运行，监控和执行必要的测试。
380kV封闭开关站（GIS）机动和运行。

Inspection of buildings and facilities over the project, follow-up of ongoing works and expertise in the tender acceptance and inspection committees.

对项目上的建筑物和设施进行检查，跟进正在进行的工作，并在投标接受和检查委员会中提供专业知识。